| 
The
Crystal View CV-NNR2-DVI
is the video equivalent of a high-end,
audiophile preamp/processor. This one
unit will accept Standard, Progressive,
and High-Definition (HD) video signals
in every format, from cable, satellite,
and broadcast receivers, DVD and LaserDisc
players, and VCRs of all kinds.
Once
it selects a video input, the CV-NNR2-DVI
applies several processes to improve
the quality of the video image (think
extreme makeover). These fine image
adjustments can be saved in sets of
up to four memories for every input.
Thus the picture quality can be optimized
irrespective of source material differences.
The enhanced image is then scaled to
a resolution and scan rate that best
matches the characteristics of your
video projector or display so that the
resultant picture on your screen is
the best it can possibly be.
Crystal
View ships a CV-NNR2-DVI that has been
individually scaled and calibrated to
bring out the best in every one of our
video projectors and displays. We can
think of no better recommendation than
that, but many video product reviewers
have.
Not
so long ago, a line-doubler that merely
converted standard, interlaced video
to what is now known as progressive,
was considered to be a high-tech product
and sold for more than the CV-NNR2-DVI.
With the advent of HD video, standard
TV needs a lot more help to appear watchable
on the same screen. The CV-NNR2-DVI
provides all that help and more. It
can even improve the quality of HD video.
Among other things, it can transform
1080i (interlaced) HD into 1080p (progressive)
HD.
Its
10 inputs accept Composite, S-video,
Component, RGB/VGA, DVI with HDCP (required
to view the DVI picture when the copyright
owner requires copy protection verification),
and even professional SDI. It will also
transcode between formats, so there
is no need to ever bypass the CV-NNR2-DVI
or run video through any additional
piece of equipment.
Both
the DVI inputs and DVI output have HDCP
encryption, so the CV-NNR2-DVI can accept
video from a DVI/HDCP source, enhance
it, and sent it back out, re-encrypted,
to a DVI/HDCP equipped display. The
analog video outputs are even brought
out onto professional quality, 75-ohm,
BNC connectors, rather than RCA jacks
to eliminate the even the slightest
edge distortions within the picture
due to impedance discontinuity.
KEY FEATURES:
- Standard
and High Definition analog and
digital inputs in all formats
-
Deinterlacing, transcoding,
and adjustable scaling of SD
and HD to 1080p max
-
Automatic pulldown correction
for Film, SD, and HD sources
(2:2, 3:2, and 3:3)
-
Adjustable image enhancement
of all types of video with 4
memories per input
-
Selectable input aspect ratio
and conversion to any output
ratio from 1.33 to 2.35:1
-
Adjustable image cropping and
non-linear image stretching
-
Zoom in on any source by up
to 33%
- Adjustable
gamma, multipoint gray scale,
and Y/C delay calibration
|
- Built-in
test patterns to aid setup
-
Programmable output resolution,
line by line, over the range
of 480p to 1080p
- Transcoding
of RGB and non-HDCP DVI to analog
HD Component
-
Transcoding of Component and
RGB analog HD to DVI Digital
-
Auto detection of NTSC, PAL,
and SECAM standards
- 10-bit
Digital to Analog and analog
to digital conversion with analog
oversampling
- Software
upgradable via a standard RS232
interface
|
Crystal View Model
NNR2-DVI Extended Performance Scaler
Features and
Specifications:
- 10
Programmable Inputs
- Per-pixel
motion adaptive de-interlacing
- Aspect
ratio control
- RGBHV
and YPrPb Component outputs
on BNC connectors
- 4
independent setup memories per
input
- NTSC,
PAL and SECAM compatible
- IR
remote and RS232 controlable
|
|
|
|
